Hardware Installations and Upgrades
Intel
®
Server Board S2600CP Intel
®
Server System P4000CP Family Service Guide (Preliminary) 33
9. Close the PCI card retention device. See letter E. Recommend to secure the PCI card with a
screw.
Figure 48. Close PCI card retention device
10. Close the PCI retainer and secure the PCI card.
Figure 49. Close PCI card retainer.
Removing a PCI Add-in Card
1. Observe the safety and ESD precautions at the beginning of this book.
2. Power down the server and unplug all peripheral devices and the AC power cable.
3. Remove the chassis cover. For instructions, see “Removing the Chassis Cover”.
4. Remove the airduct by gentlely lifting the airduct out of chassis.
5. Open the PCI card retainer.
6. Release PCI card retention device, remove screw if there is.
To Next Page
Loading...
