Intel S2600CP User Manual

Hardware Installations and Upgrades
Intel
®
Server Board S2600CP Intel
®
Server System P4000CP Family Service Guide (Preliminary) 25
Figure 28. Installing Processor – Open the Load Plate
3. Install the Processor. Take the processor out of the box and remove the protective shipping
cover (see letter “A”). Orient the processor with the socket so that the processor cutouts match
the four orientation posts on the socket (see letter “B”). Note location of gold key at corner of
processor (see letter “C”).
Figure 29. Installing Processor – Install the Processor
/
NOTE
The underside of the processor has components that may damage the socket pins if
installed improperly. Processor must align correctly with the socket opening before
installation. DO NOT DROP processor into socket!
4. Remove the Cover. Press the cover to remove it. Save the protective cover.
Figure 30. Installing Processor – Remove the Cover
5. Close the Load Plate. Carefully lower the load plate over the processor.

Intel S2600CP Specifications

General

Processor Support	Intel Xeon processor E5-2600 product family
Chipset	Intel C602
Memory Slots	24 DIMM slots
Form Factor	SSI EEB (12" x 13")
Storage	Up to 8 SATA/SAS drives
Network	Dual Gigabit Ethernet
CPU Socket Type	LGA 2011
SATA	SATA II and SATA III
RAID Support	RAID 0, 1, 5, 10
Network Controller	Intel 82574L
Power Supply	Redundant power supply support
Management	IPMI 2.0