Hardware Installations and Upgrades
Intel
®
Server Board S2600CP Intel
®
Server System P4000CP Family Service Guide (Preliminary) 35
The following figures show an example of the GPGPU bracket:
Figure 52. Side View of a GPGPU Card Extender Example
Figure 53. Top View of a GPGPU Card Extender Example
Installing and Removing an Optical Drive
Cautions: Before removing or replacing the drive, you must first take the server out of service, turn
off all peripheral devices connected to the system, turn off the system by pressing the power button,
and unplug the power cord from the system or wall outlet.
To maintain proper system cooling, a filler panel must be installed if you do not install a device at
this location.
Installing an Optical Drive
1. Remove the O filler (see letter “A”).
To Next Page
Loading...
Need help?
General