KIP 3000 - Trailing Edge Adjustment

Section 5 Scan Mode - Color 5-11
To adjust the Leading Edge, use the arrows to denote the quantity you wish to add or
remove.
Touch the value displayed area to reset the quantity.
2.6.4 Trailing Edge Adjustment
The trailing edge of each scan can be altered. ( +/- 4” )
c) additional void area can be placed on the bottom of a scan or
d) image can be removed (such as a binding strip or a file hanger)
To adjust the Trailing Edge, use the arrows to denote the quantity you wish to add or
remove.
Touch the value displayed area to reset the quantity.
Make any of the required adjustments / selections and press “OK” to accept. The
selections will now be displayed on the main Scan screen.
Ima ge
Scanner
KIP
Im a g e
Scanner
KIP
Ima g e
Scanner
KIP
Im a g e
KIP
Trail edge + Trail Edge -
Original
Scan
Original
Scan
Added trailing margin
Deleted trailing image