KIP 3000 - Cutter Set

Section 1 Basic Printer Functions 1-38
3. 1. 2. 4 Cutter Set
This message is indicated when the Cutter Knob is not located at the correct position.
Open the Roll Deck, and slide the Cutter Knob fully to the left or right to align the Cutter Knob with
the end of the railing.
Incorrect (Not placed at the end) Correct (Placed at the left or right end)
3. 1. 2. 5 Toner Empty
This message is indicated when the Toner Cartridge is
emptied with the toner.
Replace the Toner Cartridge with the new one making
reference to [2. 4 Replacement of Toner Cartridge] on
the page 2-10.
3. 1. 2. 6 Paper Empty
This message is indicated when the roll paper in use is
emptied.
Replace roll paper with the new one making reference to
[2. 3 Replacement of Roll Paper] on the page 2-5.
Cutter Knob Cutter Knob
Roll
p
a
p
er
Toner Cartridge