Section 2 Copy Mode - Monochrome 2-13
2.5 Advanced Settings
The Advanced Setting button contains the
additional parameters on a sub screen:
a) Mirror
b) Invert
c) Fold (if optional device connected)
d) Stamp (Water Mark)
e) Lead Edge Adjustment
f) Trail Edge Adjustment
When any of the adjustments / selections is selected, the selections will now be
displayed on the main Copy screen
2.5.1 Mirror
Select this button to “mirror” a scan. This can be utilized on
originals that may have the actual image on the reverse side such
as older “sepia” or “film” documents.
2.5.2 Invert
Select this button to change a region of white to black and visa
versa of a scanned document. This is normally used for “negative”
documents or “blue prints”.
To Next Page
Loading...
