Section 1 Basic Printer Functions 1-41
4. 1 User Maintenance
4. 1. 1 Scanner
Clean each Scan Glass, Feeding Rollers and Guide Plates once per a week, as the scan/copy
image may become defective if these parts are dirty.
1. Turn off KIP3000.
2. Open the Scanner Unit pulling up the Levers (1).
2. Wipe each Scan Glass (2) and Feeding Rollers (3) with a soft cloth.
Use equal volume mixture of water and a neutral detergent.
NOTE
Do not use organic solvent, glass cleaner and anti-static spray for the cleaning.
23
3
1
To Next Page
Loading...
