KIP 3000 - Basic Copying Operations; Simple Copying Steps

Section 2 Copy Mode - Monochrome 2-4
1.2 Simple Copying
To copy, please follow these basic steps. The following chapters have details on
adjustments and parameters that the user can change to modify the copies as
required.
1.2.1 Select Copy Mode
On the lower region of the Operator Panel, select “COPY”.
1.2.2 Select Size Mode
Select whether the document is an engineering or architectural size document. This
will allow the automatic width detection to function.
Engineering widths = 34, 22, 17, 11, and 8.5 inches
Architecture widths = 36, 30, 24, 18, 12, and 9 inches