2.15.4 EGR Valve (D)
A device that provides for exhaust gas recovery that is controlled
by ECU, which, according to acceleration parameters, RPM and
power requested, varies the opening and closing of the valve.
The device has an integrated ECU, which, on each start-up of the
control panel, executes an operation self-check.
In the event of a malfunction, it sends a signal to ECU, which, in
turn, signals the anomaly on the control panel.
Characteristics:
Type Dell'Orto EGV A16
Operating/storage temperature: -30°C / +130°C.
2.15.5 Cold starting device (Heater)
The cold starting device consists of a resistance, managed by the
ECU, which is activated when the ambient temperature is ≤ -16°
C.
The intake air is heated through the resistance and facilitates
starting.
Characteristics:
Type Hidria AET 12 V
Power 550 W