Komatsu PC2000-8 - Door Lock; Emergency Exit from Operators Cab

DETAILED CONTROLS AND GAUGES OPERATION
3-104
N (Neutral) : The upper structure and arm are held in position
and do not move.
Right work equipment control lever (4) is used to operate the
boom and bucket.
Boom operation
(a) RAISE
(b) LOWER
Bucket operation
(c) DUMP
(d) CURL
N (Neutral) : The boom and bucket are held in position and do
not move.
DOOR LOCK 3
Use the door lock to fix the door in position after opening it.
1. Push the door into catch (1) to lock it in position.
2. When releasing the door lock, pull back lever (2) and open
catch (1). When fixing the door in position, close the catch
securely.
EMERGENCY EXIT FROM OPERATOR'S CAB 3
If it should be impossible to open the cab door for any reason,
use rear left window (B) as an emergency exit.