OPERATION DETAILED CONTROLS AND GAUGES
3-119
Method of Operation 3
The air conditioner can be operated automatically or manually. Select the method of operation as desired.
Automatic Operation
1. Turn on auto switch (8) (pressed to be ON).
q Then the lamp above switch (8) lights up.
q Set temperature (a) and air volume (b) are also shown
on the monitor display.
2. Use temperature set switch (3) to set to the desired tem-
perature. The air flow, combination of vents, and selection
of fresh or recirculated air is automatically selected accord-
ing to the set temperature, and the air conditioner is oper-
ated automatically to provide the set temperature.
When vent display monitor (c) displays (d) or (e), and engine
coolant temperature is low, the air flow is automatically limited
to prevent cold air from blowing out.
To Next Page
Loading...
