ATTACHMENTS AND OPTIONS ATTACHMENT GUIDE
6-5
1. Bucket size based on ISO 7451, heaped material with a 1:1 angle of repose.
2. Max Bucket Volume/Weight are for reference only and are not necessarily available from the factory.
3. Table is based on General Purpose buckets and both conditions of Volume (m
3
) and Weight (kg) must not be
exceeded.
4. Please consult with your distributor for the correct selection of buckets and attachments to suit the application.
The recommendations are given as a guide only, based on typical conditions.
Select the combination of boom, arm, and bucket from the combinations shown in the table below.
Values shown are in accordance with EN474-5:2006+A1:2009 (E)
FRONT GUARD 6
This is a device to protect the operator. Be sure to use the part in a jobsite where there is a danger of flying frag-
ments like crushed stone pieces.
PC2000-8
Max Bucket Vol-
ume / Weight ISO
1-Piece Boom
2.9 m Arm
(7.1 m Boom)
Bucket 1.2 t/m
3
m
3
/ kg 15.54 / 15150
Bucket 1.5 t/m
3
m
3
/ kg 13.40 / 13675
Bucket 1.8 t/m
3
m
3
/ kg 11.78 / 12575
To Next Page
Loading...
