DETAILED CONTROLS AND GAUGES OPERATION
3-136
CIRCUIT BREAKER 3
If there is a surge of current, the circuit breaker shuts off the electric circuit and protects the electrical components
and wiring from burning out.
When restoring the electrical circuit that has been shut off, push in the reset button that sprang out when the circuit
was cut off. If the electric circuit is working properly, the reset button will stay pushed in. If it springs out again
immediately when it is pushed in, it is necessary to inspect the electrical circuit.
Circuit Breaker(A)
This is installed to the power board inside the cab base room.
To Next Page
Loading...
