OPERATION MACHINE OPERATIONS AND CONTROLS
3-231
PARKING MACHINE 3
q Avoid stopping suddenly. Give yourself ample room
when stopping.
q When stopping the machine, select flat hard ground
and avoid dangerous places. If it is unavoidably neces-
sary to park the machine on a slope, insert blocks
underneath the track shoes. As an additional safety
measure, thrust the bucket into the ground.
q If the control lever is touched by accident, the work
equipment or the machine may move suddenly, and
this may lead to a serious accident. Before leaving the
operator's compartment, always set the lock lever
securely to LOCK position.
1. Put the left and right travel levers (1) in the neutral position,
then stop the machine.
2. Turn fuel control dial (2) to lower the engine speed to low
idle.
3. Set the work equipment in the posture shown in the dia-
gram on the right.
To Next Page
Loading...
