Komatsu PC2000-8 - Replace Fuel Tank Breather Element

HANDLING FUEL QUICK CHARGE ATTACHMENTS AND OPTIONS
6-10
REPLACE FUEL TANK BREATHER ELEMENT 6
For machines equipped with the fuel quick charge, the fuel tank breather is different from the breather on the
machine is not equipped with the fuel quick charge. Use the following procedure to replace the fuel tank breather
element every 1000 hours.
1. Open breather cover (1) on top of the fuel tank. (This is
locked or unlocked using the starting switch key)
2. Remove the cap (with element) of breather (2) and replace
with a new part.
3. Close breather cover (1).