Komatsu PC2000-8 - Replace Fuel Tank Breather Element

MAINTENANCE MAINTENANCE PROCEDURE
4-89
REPLACE FUEL TANK BREATHER ELEMENT 4
1. Remove nut (2) of breather assembly (1) at the top surface
of the fuel tank, then remove cover (3).
2. Replace breather element (4) with a new part.
3. Install cover (3) and nut (2).
NOTICE
q For machines equipped with the optional service cen-
ter, see “REPLACE FUEL TANK BREATHER ELEMENT
(6-31)“.
q For machines equipped with the optional fuel quick
charge, see “REPLACE FUEL TANK BREATHER ELE-
MENT (6-10)“.