MACHINE OPERATIONS AND CONTROLS OPERATION
3-218
q Bucket control
Move the right work equipment control lever to the left or
right to operate the bucket.
When the work equipment control lever is moved to the N position while the machine is idling, the engine speed
lowers to the medium revolution in approx. 4 seconds owing to the function of the auto deceleration device, even if
the fuel control dial is in the FULL position.
This machine is equipped with an accumulator in the operation circuit. For this reason, the work equipment can be
lowered to the ground, even when the engine is not running. To do that, turn the engine starting switch to the ON
position and the lock lever to the FREE position, and then operate the work equipment control lever to lower, but
all these steps need to be done within 15 seconds after the engine stops.
To Next Page
Loading...
