DETAILED CONTROLS AND GAUGES OPERATION
3-16
Hydraulic Oil Temperature Monitor
When this monitor (5) shows low-temperature display (A), carry
out the warming-up operation. For details, see “Hydraulic
Equipment Warm Up (3-195)“.
Continue the warming-up operation for the hydraulic equipment
until monitor (6) shows the correct temperature display (B).
Display (A) at low temperatures: Monitor background (D) is
white
Display (B) at correct temperatures: Monitor background (D) is
blue
Display (C) when condition is abnormal: Monitor background
(D) is red
PTO Temperature Monitor
When this monitor (6) is lighted up white in low temperatures,
carry out the warming-up operation. For details, see “Hydraulic
Equipment Warm Up (3-195)“. Continue the warming-up oper-
ation until monitor (6) goes out.
Engine Oil Temperature Monitor
When this monitor (7) is lighted up white in low temperatures,
carry out the warming-up operation. For details, see “Engine
Warm Up (3-193)“. Continue the warming-up operation until
monitor (7) goes out.
Grease Level Monitor
When this monitor (8) is lighted up red, it shows that the
remaining amount of grease is below the low level. Add grease
as soon as possible.
To Next Page
Loading...
