Konica Minolta IC-206 - Starting the Print Operation

6
Control panel operations for printing functions
6-4 IC-206
Starting the print operation
Normally, printing begins when printing is performed from a connected
computer.
- Normally, when printing is performed from a connected computer,
printing begins automatically.
- If a print operation is performed from a connected computer while the
machine is copying, printing begins automatically when no copy
operation is performed for 30 seconds.
- When using the optional fax kit: If print data is received while fax data is
being received, the printing of print data has priority.
After the reception job is completed in Fax mode, the print data is printed,
and then the fax is printed.
- While printing, copy settings can be specified and fax operations can be
performed. (Copies and faxes are printed after printouts are printed.)