Konica Minolta IC-206 - Specifying the DNS Settings

8
Network settings
8-18 IC-206
Specifying the DNS settings
1 In the "NETWORK SETTING" menu, press the [,] or [+] key until "DNS
CONFIG." is selected, and then press the [OK] key.
2 Press the [,] or [+] key until "DISABLE" or "ENABLE" is selected, and
then press the [OK] key.
– If "DISABLE" is selected, the message "ACCEPTED" appears, and
then the "NETWORK SETTING" menu appears again.
– If "ENABLE" was selected, a screen appears, allowing you to
specify the IP address of the DNS server. Continue with step 3.
NETWORK SETTING
DNS CONFIG.
IP ADDRESS SETTING
WEB SETTING
DNS CONFIG.
ENABLE
DISABLE