Installing the printer driver
3
IC-206 3-15
Installing using Plug and Play on Windows 98 SE
2
Note
If the driver is installed using Plug and Play, first the USB-compatible
device driver is installed, next the USB printing support driver is installed,
then the TWAIN driver for scanning is installed, and then installation of
the printer driver begins. The procedure described in this manual is for
the installation of the USB-compatible device driver, the USB printing
support driver, the TWAIN driver, then the printer driver. For details on the
TWAIN driver, refer to the user manual for the TWAIN driver.
Follow the instructions that appear in the Add New Hardware Wizard to
complete the installation.
1 Check the contents of the Add New Hardware Wizard, and then click
the [Next] button.
2 Select "Search for the best driver for your device [recommended]" and
then click the [Next] button.
3 Select "Specify a location" and then specify the following folder on the
CD-ROM as the location where the driver is saved.
– Folder to be specified: \Driver\Win98_ME\English
– The folder can be selected after clicking the [Browse] button.
4 Click the [Next] button.
5 Select "The updated driver (Recommended)" and then click the [Next]
button.
6 Check the location of the driver, and then click the [Next] button.
A dialog box appears, indicating that the installation is finished.
7 Click the [Finish] button.
This completes the installation of the USB-compatible device driver.
The Add New Hardware Wizard appears again, and the installation of
the USB printing support driver begins.
8 Click the [Next] button.
9 Select "Search for the best driver for your device. [recommended]" and
then click the [Next] button.
To Next Page
Loading...
