8
Network settings
8-34 IC-206
Specifying the subject of e-mail messages
1 In the "E-MAIL SETTING 1" menu, press the [,] or [+] key until
"DEFAULT SUBJECT" is selected, and then press the [OK] key.
2 Type in the subject for e-mail messages.
– The subject can contain a maximum of 20 characters.
3 Press the [OK] key.
After the message "ACCEPTED" appears, the "E-MAIL SETTING 1"
menu appears again.
2
Note
If a number was incorrectly entered, press the [Clear/Stop] key to erase
the number, and then type it in correctly.
E-MAIL SETTING 1
POP BEFORE SMTP
DEFAULT SUBJECT
RETURN
DEFAULT SUBJECT
:test
To Next Page