Using PageScope Web Connection
12
IC-206 12-41
Restore Factory Defaults
The network interface card and image controller can be initialized.
1 Click the [Restore] button beside either "Printer Controller" or "NIC".
2 When the confirmation message appears, click the [Yes] button.
To stop initializing, click the [No] button.
2
Reminder
Jobs being processed are not saved when the initialize operation is
performed.
Be careful since the current PageScope Web Connection settings will be
lost.
Initializing the printer controller is possible only if the image controller
IC-206 is installed.
To Next Page
Loading...
