Konica Minolta IC-206 - To Delete a Part of the Entered Text; To Change Entered Characters; Entering Text with the Keypad Keys; To Enter a Space

Getting ready
2
IC-206 2-15
To delete a part of the entered text
% Press the [*] or [)] key to move the cursor (_) below the character to
be deleted, and then press the [Clear/Stop] key.
To change entered characters
% Press the [*] or [)] key to move the cursor (_) below the character that
you wish to change, and then enter the new character. The entered
character is inserted at the cursor’s position.
Entering text with the keypad keys
% To enter a character with the same key used to enter the previously
entered character, press the [)] key before entering the next character.
(Refer to the example on the previous page.)
To enter a space
% Press the [0] key in the keypad.
To stop entering text
% Press the [Reset] key.