Konica Minolta IC-206 - IPP Printing; Checking IPP-Related Settings from Pagescope Web Connection

4
Network printing
4-24 IC-206
IPP printing
Compatible operating systems: Windows 2000/Windows XP/Windows
Server 2003/Windows Vista
2
Note
In order to use IPP, the IPP settings must be enabled from PageScope
Web Connection (PSWC). Refer to "Checking IPP-related settings from
PageScope Web Connection" on page 4-24.
2
Reminder
Before specifying settings, check that the following preparations have
been completed.
The computer can communicate using the TCP/IP protocol.
This machine can communicate using the TCP/IP protocol.
The printer driver is installed on the computer.
(For details on installing the PCL driver, refer to "Installing the printer
driver by using the Add Printer Wizard" on page 3-18. If the GDI driver is
to be installed, refer to the user manual for the GDI printer controller,
included with this machine.)
Checking IPP-related settings from PageScope Web Connection
For details on PageScope Web Connection, refer to "Using PageScope Web
Connection" on page 12-3.
1 Start up PageScope Web Connection.
2 Type in the password to log on to the Administrator mode.
– For the password, consult with the network administrator.
3 Click the Network tab, and then click "IPP Configuration" in the menu.
4 Make sure that the "Enable IPP" check box is selected. If the check box
is not selected, IPP printing cannot be performed.