Network printing
4
IC-206 4-11
NetWare server/client (except NDPS)
1 Connect the network cable. (Refer to "Connecting to a local area
network (LAN)" on page 2-16.)
2 Specify the necessary settings for connecting this machine to a
NetWare server. (Refer to "Connecting the computer and this machine
over a network" on page 4-18.)
3 Specify the necessary settings for printing through a NetWare server
from a NetWare client. (Refer to "Connecting the computer and this
machine over a network" on page 4-18.)
NetWare server/client (NDPS)
1 Connect the network cable. (Refer to "Connecting to a local area
network (LAN)" on page 2-16.)
2 From the machine’s control panel, specify the IP address, subnet mask
and default gateway. (Refer to "Specifying an IP address" on
page 4-12.)
3 Print the settings information, and then check the settings. (Refer to
"Printing the settings information" on page 4-17.)
4 Specify the necessary settings for connecting this machine to a
NetWare server. (Refer to "Connecting the computer and this machine
over a network" on page 4-18.)
5 Specify the necessary settings for printing through a NetWare server
from a NetWare client. (Refer to "Connecting the computer and this
machine over a network" on page 4-18.)
To Next Page
Loading...
