Network settings
8
IC-206 8-47
6 Type in the IP address or host name for the LDAP server.
– The host name can contain a maximum of 64 characters.
– To specify a host name for the LDAP server, the DNS setting must
be specified.
– For the IP address or host name of the LDAP server, consult with
the network administrator.
– If the setting was incorrectly entered, press the [Clear/Stop] key to
erase it, and then type it in correctly.
7 Press the [OK] key.
After the message "ACCEPTED" appears, the "LDAP SETTING" menu
appears again.
LDAP SERVER ADDRESS
To Next Page