Performing a scan to e-mail operation
10
IC-206 10-7
– For information on documents that can be used and the scanning
area of the image, refer to the user manual included with this
machine.
3 Using the keypad, type in the e-mail address of the recipient.
– When the destination address is entered, "OTHER SETTING=,"
appears. To change the transmission settings, such as the subject,
cc address or file format, press the [,] key. The "SCAN OTHER
SETTING" menu appears. For details on changing the transmission
settings, refer to "Changing the transmission settings" on
page 10-13.
– The destination can be specified using any of the following
procedures.
Refer to "Specifying a one-touch dial destination" on page 10-41.
(One-touch dial destinations are available only when optional fax kit
FK-506 is installed.)
Refer to "Specifying a speed dial destination" on page 10-42.
Refer to "Selecting a destination from the phone book" on
page 10-44.
– Up to 64 characters can be entered.
4 Press the [Start] key.
The "BOOK SCAN" menu appears.
300x300dpi TIFF 100%
TO:user@test.loc
TEXT/PHOTO
OTHER SETTING=
To Next Page
Loading...
