1-6 BA 35101/02/03 EN – Edition 1.0 * 35101_02_03b110.fm
Introduction
Multipurpose bucket
3
351-01
1000187786
1000187787
1750 (68.90)
with teeth
1750 (68.90)
without teeth
0,55/0,65
Grading, removing and scraping
vegetation, for example; picking up
and evenly spreading material;
grabbing bulky material; loading
trucks
(material density ≤ p = 1,8 t/m³)
351-02
1000187296
1000187297
1850 (72.83)
with teeth
1850 (72.83)
without teeth
0,65/0,75
351-03
1000236118
1000236120
1950 (76.77)
with teeth
1950 (76.77)
without teeth
0,75/0,85
Side swing bucket
3
351-01 1000175757
1744 (68.66)
without teeth
0,45/0,55
Standard bucket, however with
benefits for filling and backfilling
material
(material density ≤ p = 1,8 t/m³)
351-02
1000176121
1844 (72.60)
without teeth
0,6/0,7
351-03
Verge grading bucket
3, 4
351-03 1000111078 Without teeth –
For stripping and picking up verge
material
High-tilt bucket
3, 4
351-01
1000156433
1000154475
1850 (72.83)
without teeth
–
As standard bucket, however with
a 80 – 100 cm higher dump height
(material density ≤ p = 1,3 t/m³)
351-02
351-03
Heavy duty bucket with
hydraulic clamp
3, 4
351-01 1000111090 1850 (72.83) 0,6/0,7
Picking up and transporting e.g.
bulky recycling material (material
density ≤ p = 1,3 t/m³)
351-02 1000111053 2050 (80.70)
–
351-03 1000100611 1850 (72.83)
Heavy duty forks with
hydraulic clamp (silage
fork)
3, 4
351-01
351-02
1000128262 1800 (70.86) –
Picking up and transporting e.g.
bulky and fibrous recycling material
(e.g. grass, manure, brushwood;
material density ≤ p = 1,3 t/m³)
Manure forks with grab
3, 4
351-01
351-02
1000178474 1800 (70.86) –
Picking up and transporting e.g.
grass, manure, brushwood and
straw
Pallet forks
3, 4
351-01
1000237357
1000237358
1000 (39.37)
1200 (47.24)
–
Picking up and transporting pallets
351-02
351-03
Pallet forks with foldable
fork arms
3, 5
351-01
351-02
351-03
1000237336 1200 (47.24) –
Pallet forks
(hydraulic lateral displace-
ment)
3, 4
351-01
351-02
351-03
1000247565 1200 (47.24)
–
351-03 1000182585 1500 (60.00)
Pallet forks,
floating fork arms
3,
4
351-01
351-02
1000177240 1000 (39.37)
–
351-03 1000178334 1200 (47.24)
Description of attachment
Wheel
loader
Part no.
(model)
Dimensions
mm (in)
ISO 7546 capacity
struck/heaped m³
Use
To Next Page
Loading...
