2-4 BA 35101/02/03 EN – Edition 1.0 * Sicherheit_Radlader.fm
Safety instructions
• Never make any modifications, additions or conversions to the machine and its super-
structures (e.g. cab, loader unit etc.), as well as to the attachments, which might affect
safety without the approval of the manufacturer! This also applies to the installation and
the adjustment of safety devices and valves, as well as to welding work on load-bearing
elements!
• Spare parts must comply with the technical requirements specified by the manufac-
turer. Original spare parts can be relied to do so!
• Replace hydraulic hoses within stipulated and appropriate intervals even if no safety-
relevant defects have been detected!
• Before working on or with the machine, remove jewellery, such as rings, wristwatches,
bracelets etc., and tie back long hair and do not wear loose-fitting garments, such as
unbuttoned or unzipped jackets, ties or scarves.
Injury can result from being caught up in the machinery or from rings catching on
moving parts!
• Keep the machine clean. This reduces
• Fire hazard, e.g. due to oil-soaked rags lying around
• Danger of injury, e.g. due to dirt or debris on the footholds, and
• Danger of accident e.g. due to dirt or debris on the brake or accelerator pedal!
• Observe all safety, warning and information signs and labels on the machine!
• Adhere to prescribed intervals or those specified in the Operator's Manual for routine
checks/inspections and maintenance work!
• Tools and workshop equipment adapted to the task on hand are absolutely indispen-
sable for carrying out service, inspection, maintenance or repair work!
To Next Page
Loading...
