Installing in Windows NT 3.51 Networks
Print Server Installation Manual 3-31
3.6 Installing in Windows NT 3.51 Networks
In this section, the installation of your KYOCERA-PrintServer in
Windows NT 3.51 networks is described.
Before beginning the actual installation, you should have basic
knowledge of TCP/IP. Please read the "Basic TCP/IP
Terminology" section on page 1-6 if necessary.
Print Server
Function
Windows NT 3.51 networks are so-called server-based networks.
A server provides workstations located in the network with certain
services. Services include, among other things, the administration
of jointly used data sources and print services, all of which enable
the joint usage of printers in the network.
While printing is being carried out in Windows NT 3.51 networks,
the print data is loaded into the network as an LPD protocol via the
LPR port and sent to the IP address of the print server. The print
server receives the print data and routes it to the printer.
Server-Based
Network
Fig. 3-19: Server-based network with print server
To Next Page
Loading...