Kyocera Printserver - Integrating Shell Scripts into AIX Systems

Printing via Shell Scripts
Print Server Installation Manual 4-35
lpc> quit
Example: lpc
lpc> enable my_printer
lpc> start my_printer
lpc> quit
2. Test the new printer:
Syntax: lpr -P<printer name> /etc/printserver/<file>
Example: lpr -Pmy_printer /etc/printserver/bsd.sh
4.6.4. Integrating Shell Scripts into AIX Systems
If the shell scripts are located in the '/etc/printserver' directory, you
must adapt them and integrate them into the spooler.
Installation Entries The installation sequence requires the following entries:
All three names may be assigned arbitrarily. You may also use one
name for all three entries. Every name assigned, however, must be
used continuously throughout the installation sequence.
User input
Example in the
text
Name of the adapted shell script my_script
Name of the zero device my_device
Name of the printer (visible to the user after installation) my_printer