Kyocera Printserver - Allocating the Print Server as a Queue Server

Installing in Novell NetWare 3.x Networks in Print Server Mode
Print Server Installation Manual 2-41
2.5.3. Allocating the Print Server as a Queue Server
In the last step, the print server must be assigned to the print
queue.
Procedure Proceed as follows:
1. Select the new print queue.
2. Press ENTER.
The following window appears:
Fig. 2-31: 'Print Queue Information' window
3. Select 'Queue Servers.'
4. Press ENTER.
The 'Queue Servers' window appears.
5. Press INS.
The following window appears:
Fig. 2-32: 'Queue Server Candidates' window