Installing in NetWare 5/4 Networks in Remote Printer Mode
2-16 Print Server Installation Manual
Fig. 2-8: Installed Print Server in Remote Printer Mode
2.3.2. Configuring the KYOCERA-PrintServer
The name of the print server must be configured on the
KYOCERA-PrintServer, so that status messages can be
transferred from the print server to the file server. You can do this
using either the print server homepage, the KyoNetCon or the FTP
parameter transfer. This paragraph describes the configuration
using the KyoNetCon. If you would like to use the print server
homepage, please read the "Configuring Novell NetWare" section
on page 3-10 in the User Manual. If you would like to use the FTP
parameter transfer function, please read "Configuring Parameters
Via FTP" section on page B-13 in the User Manual.
To Next Page
Loading...