Kyocera Printserver - Installing a Print Queue

Installing in Novell NetWare 3.x Networks in Remote Printer Mode
2-44 Print Server Installation Manual
Procedure The installation involves the following steps:
Installing a Print Queue
Installing the Novell PSERVER
Installing a Remote Printer
Allocating the Print Queue
Configuring the KYOCERA-PrintServer
Starting PSERVER on the File Server
It is of utmost importance that you follow the steps listed below in
the order in which they appear!
2.6.1. Installing a Print Queue
In the first step, a print queue must be installed on the file server.
Procedure Proceed as follows:
1. Log on as SUPERVISOR.
2. Start PCONSOLE.
The following window appears: