Kyocera Printserver - Creating an Output Queue; Saving the IP Address in the Print Server

Creating an Output Queue
6-10 Print Server Installation Manual
6.3 Creating an Output Queue
The installation involves the following steps:
Saving the IP Address in the Print Server
Creating an Output Queue
Using the Output Queue
6.3.1. Saving the IP Address in the Print Server
In case of all KYOCERA printers with the exception of the
FS-400, FS-600, FS-680, FS-1000, and several other printer
models, you can enter the IP address directly into the printer
operating panel and save it in the print server.
The procedure varies depending on the printer model and the
operating panel. Read the "Configuring Parameters Using the
KYOCERA Printer Operating Panel" section on page B-14 of the
User Manual if necessary.
Operating panel settings will not be saved in the print server if a
password has been assigned.