Installing in Windows Networks (peer to peer printing via NetBIOS)
3-4 Print Server Installation Manual
NT 4.0 netoworks read the "Installing the TCP/IP Protocol"
section on page 3-20. For the installation in Windows NT 3.51
networks read the "Installing the TCP/IP and FTP Services"
section on page 3-32.
If TCP/IP has already been installed, you can continue with the
"Saving the IP Address in the Print Server" section on page 3-4.
3.2.2. Saving the IP Address in the Print Server
With all KYOCERA printers with the exception of the FS-400,
FS-600, FS-680, FS-1000, and some of the elder models, you can
enter the IP address directly into the printer operating panel and
save it in the print server.
The procedure varies depending on the printer model and the
operating panel. Read the "Configuring Parameters Using the
KYOCERA Printer Operating Panel" section on page B-14 of the
User Manual if necessary.
Operating panel settings will not be saved in the print server if a
password has been assigned.
3.2.3. Configuring the NetBIOS Parameters
The NetBIOS parameters for the print server must be configured
so that the print server can be seen in the network environment.
This can be done using the print server homepage, the KyoNetCon
To Next Page
Loading...