Basic Principles
5-2 Print Server Installation Manual
5.1 Basic Principles
For the most part, the KYOCERA-PrintServer is installed in
Apple networks automatically.
Which Protocols are
Used?
The print server works in AppleTalk networks. Depending on the
network type, EtherTalk and TokenTalk are supported.
What Happens
During Installation
in Apple Networks?
After the print server is turned on, it initializes. In the process, the
print server determines its AppleTalk address. If the print server
has already been in use, it uses the last address. If zones are used in
your network, the print server will assign the default zone. In a last
step, the system will check whether the print server name already
exists in the network. If this is the case, the name will be expanded
automatically (e.g.: Apple -> Apple_1 to Apple_999).
To Next Page
Loading...