Basic TCP/IP Terminology
1-16 Print Server Installation Manual
1.2.6. Gateway
Using a gateway, you can address IP addresses from external
networks. Your print server is configured not to use gateways by
default. If your network does not use gateways, you do not need to
take any further steps. If, however, you are using a gateway in
your network, you should ask your system administrator for the IP
address of the gateway. You can change this parameter using either
the print server homepage, the KyoNetCon, SNMP or FTP
parameter transfer.
1.2.7. Subnet Mask
What Is the Subnet
Mask?
With the help of the subnet mask, large networks can be split up
into subnetworks. In this case, the user IDs of the IP addresses are
assigned to the various subnetworks.
9104 Prints all data in hex dump mode. Hex dump
mode is mainly used to search for errors in print
data. The data is printed as a byte in hexadecimal
form instead of letters and numbers. Printer
control commands are printed as hexadecimal
values and do not influence the printing result in
any way.
5
9105 Not assigned 6
9106 Not assigned 7
2900 Supports the RSO Spooler (BS2000) 8
Port number Preset function Logical printer
To Next Page
Loading...