Installing in Windows 98 and 95 Networks (KYOCERA Monitor)
3-16 Print Server Installation Manual
The procedure varies depending on the printer model and the
operating panel. Read the "Configuring Parameters Using the
KYOCERA Printer Operating Panel" section on page B-14 of the
User Manual if necessary.
Operating panel settings will not be saved in the print server if a
password has been assigned.
3.4.3. Setting Up the Printer
Set up your printer as a local printer under Windows 98 or 95.
Select LPT1 as the printer port. Do not print out a test page.
Please read the printer installation instructions in your Windows or
printer user manual if necessary.
3.4.4. Installing the KYOCERA Monitor
The KYOCERA Monitor can be found on the KYOCERA Printer
Library CD-ROM enclosed in the product packaging of your print
server.
Procedure Proceed as follows:
1. Insert the KYOCERA Printer Library CD-ROM into your
CD-ROM drive.
The CD-ROM will start automatically.
2. Install the KYOCERA Monitor.
To Next Page
Loading...