Kyocera Printserver - 2.2 Installing in NetWare 5;4 Networks in Print Server Mode

Installing in NetWare 5/4 Networks in Print Server Mode
2-6 Print Server Installation Manual
2.2 Installing in NetWare 5/4 Networks in Print
Server Mode
In this section, the installation of your KYOCERA-PrintServer in
Novell NetWare 5/4 networks for the NDS printout in print server
mode is described. Quick Setup in the NetWare Administrator
enables easy, safe installation. In a single step, you can install a
print server, a printer and a print queue.
Before beginning the actual installation, you should have basic
knowledge of Novell networks. If this is not the case, please read
"Basic Principles" section on page 2-2.
Installation Entries The installation requires the following entries:
Requirements Before installation, make sure that:
! The print server is connected and the printer is turned on.
! The IPX protocol is installed on every computer intended for
printing.
! A Novell NetWare client is installed on the computer.
NetWare Administrator User Input Example in the text
Print Server Name <Name of the
KYOCERA-PrintServer>
or Novell name
SB0001FF
Printer Name <Printer Name> + #1 to #8
for the logical printer
MY_PRINTER#1
Print Queue Name <arbitrary name> MY_QUEUE