Installing in Windows 2000 Networks (IPP Printing)
Print Server Installation Manual 3-7
3.3 Installing in Windows 2000 Networks (IPP
Printing)
In this section, the installation of your KYOCERA-PrintServer in
Windows 2000 networks for IPP printing is described. For IPP
printing socket 631 is used.
Make sure that Service Pack 1 or later has been installed.
Procedure The installation involves the following steps:
Saving the IP Address in the Print Server
Setting Up the Printer
3.3.1. Saving the IP Address in the Print Server
With all KYOCERA printers with the exception of the FS-400,
FS-600, FS-680, FS-1000, and some of the elder models, you can
enter the IP address directly into the printer operating panel and
save it in the print server.
The procedure varies depending on the printer model and the
operating panel. Read the "Configuring Parameters Using the
KYOCERA Printer Operating Panel" section on page B-14 of the
User Manual if necessary.
To Next Page
Loading...