Installing in Novell NetWare 3.x Networks in Print Server Mode
Print Server Installation Manual 2-37
2.5 Installing in Novell NetWare 3.x Networks in
Print Server Mode
In this section, the installation of your KYOCERA-PrintServer in
Novell NetWare 3.x networks in print server mode is described. In
Novell NetWare 3.x networks, the print server is installed by
means of the PCONSOLE program.
Before beginning the actual installation, you should have basic
knowledge of Novell networks. If this is not the case, please read
the "Basic Principles" section on page 2-2.
Installation Entries The installation requires the following entries:
Please read the "Print Server Name" section on page 1-3 if
necessary.
Requirements Before installation, make sure that:
! The IPX protocol is installed on every computer intended for
printing.
! A Novell NetWare client is installed on the computer.
! The print server is connected, and the printer is turned on.
Box in PCONSOLE User input Example in the text
Print Server Name <name of
KYOCERA-PrintServer>
or Novell name
SB0001FF
Print Queue Name
<arbitrary
name>
MY_QUEUE
To Next Page
Loading...