Kyocera Printserver - Installing a Remote Printer; Print Server Information Window

Installing in Novell NetWare 3.x Networks in Remote Printer Mode
Print Server Installation Manual 2-47
2.6.3. Installing a Remote Printer
A remote printer must then be installed into PSERVER. In this
case, the remote printer corresponds to your
KYOCERA-PrintServer.
Procedure Proceed as follows:
1. Select the new print server.
The following window appears:
Fig. 2-37: 'Print Server Information' window
2. Select 'Print Server Configuration.'
The following window appears:
Fig. 2-38: 'Configured Printers' window
3. Press ENTER.
The following window appears: