Installing the Print Server into the RSO Spooler
7-6 Print Server Installation Manual
7.5 Installing the Print Server into the RSO
Spooler
The IP address of the KYOCERA-PrintServer and TCP/IP port
2900 must be entered into the RSO spooler. The SPSERVE utility
program is available for this purpose.
Procedure Proceed as follows:
1. Call the SPSERVE utility program.
2. Enter the IP address and TCP/IP port 2900 into the RSO
spooler as the printer.
3. Enter '9000-PCL' as the printer type, for example.
To Next Page
Loading...