Kyocera Printserver - Integrating Shell Scripts into BSD Systems

Printing via Shell Scripts
Print Server Installation Manual 4-31
4.6.3. Integrating Shell Scripts into BSD Systems
If the shell scripts are located in the '/etc/printserver' directory, you
must adapt them and integrate them into the spooler.
Installation Entries The installation sequence requires the following entries:
All four names may be assigned arbitrarily. You may also use one
name for all four entries. Every name assigned, however, must be
used continuously throughout the installation sequence.
Procedure The installation involves the following steps:
Adapting the Shell Script
Creating the Printer Device
Creating the Spool Directory
Entering the Spooler into the Printer System
Enabling the Printer
4.6.3.1. Adapting the Shell Script
The shell script must be adapted to your network. A copy of the
shell script is therefore created and saved in the
User input
Example in the
text
Name of the adapted shell script my_script
Name of the zero device my_device
Name of the spool directory my_spool
Name of the printer (visible to users after installation) my_printer