Kyocera Printserver - Page 138

Printing via the LPD Protocol
4-18 Print Server Installation Manual
7. Enter the host name of the print server into the 'Remote System
Name' box:
Example: SB0001FF
8. Enter a logical printer (lp1 - lp8) into the 'Remote Printer
Name' box:
Example: lp1
9. Select the 'Remote Printer is on a BSD System' check box:
Example: [4] Remote Printer is on a BSD System.
10. Click 'OK' to confirm.
Procedure for HP
VUE
Proceed as follows:
1. Start HP VUE.
2. Start the Printer/Plotter Manager.
3. Select 'Printers/Plotters' on the 'List' menu.
4. Select 'Add Remote Printer/Plotter...' on the 'Actions' menu.
5. Enter an arbitrary printer name into the 'Printer Name' box:
Example: my_printer
6. Enter the host name of the print server into the 'Remote System
Name' box:
Example: SB0001FF
7. Enter a logical printer (lp1 - lp8) into the 'Remote Printer
Name' box:
Example: lp1
8. Select the 'Remote Printer is on a BSD System' check box:
Example: [4] Remote Printer is on a BSD System.
The print server status can be viewed using the Printer/Plotter
Manager or the 'lpstat' shell program.