Installing in NetWare 5 Networks with NDPS Gateways
2-22 Print Server Installation Manual
Requirements for lpr
Installation
Before installation, make sure that:
! The print server is connected and the printer is turned on.
! The IP address is saved on the print server.
! IP has been set up on the Novell file server.
! NDPS Broker and NDPS Manager have been set up and
started.
Requirements for
Queue Based
Installation
Before installation, make sure that:
! The print server is connected and the printer is turned on.
! NDPS Broker and NDPS Manager have been set up and
started.
! The IPX protocol is installed on every computer intended for
printing.
! A Novell NetWare client is installed on the computer.
Procedure Proceed as follows:
1. Select the menu item 'Remote Console' in the 'Tools' menu.
2. Log into your server.
3. Configure the necessary filters via the kycon.
4. Start kypnp at the system console:
For IP: load kypnp lpr=1
For IPX: load kypnp
The printer agent is created.
5. Stop kypnp:
unload kypnp
To Next Page
Loading...