Leader LT4670 - Copying Presets from a USB Memory Device to the Instrument

14 SYSTEM CONFIG MENU
137
14.2.5 Copying Presets from a USB Memory Device to the Instrument
To copy presets from a USB memory device to the instrument, follow the procedure below. This
feature is useful when you want to use multiple instruments with the same settings. (Copy the
presets to the USB memory device in advance by using the COPY INT→USB menu.)
If there is already a preset stored in the instrument, it will be overwritten.
This setting appears when a USB memory device is connected.
Procedure
SYSTEM CONFIG > PRESET > COPY USB→INT
To copy a preset, follow the procedure below.
1. Select the copy source in the USB memory device.
Select ALL or a number from NUMBER 0 to NUMBER 9.
2. Select OK.
● USB Memory Device Structure
Presets are copied from the PSET folder of the USB memory device.
The "_****" portion of each file name is added if you add a comment to the preset.
Note that if you use a PC to edit the name of a file, you will no longer be able to copy the
file.
■ USB memory device
┗ ■ LT4670_USER
┗ ■ PSET
┣ ■ PRESET_00_****.PRE
┃
…
┗ ■ PRESET_09_****.PRE
2 . C O P Y U S B → I N T
| A L L
3 . C O P Y U S B → I N T A L L
■ O K □ C A N C E L