3 SPECIFICATIONS
18
Leap Second
Application Setting Set the application date/time with a timer.
(The PTP (SER03) does not support timer setting.)
Daylight Savings Time
Application Setting Set the application date and time with a timer.
Preset Function
Preset Saves the panel settings.
Number of Presets 10
Recall Method Panel, remote connector, SNMP (future support), REST-
API (future support), browser
Copy Method Copy from this instrument to a USB memory device or
copy from the USB memory device to this instrument.
* Logo data and device-specific information (IP address, time, etc.) cannot be saved.
Logging Feature
Saved Items Genlock status change, instrument operation, alarm
information, attention information
Number of Logs Up to 1000
Copy Method Copy from this instrument to a USB memory device.
Display Panel, browser (future support)
3.3.2 LT4670-SER01 (GNSS)
I/O Connectors
GNSS Input Connectors
Connector 1 BNC connectors
Input Impedance 50 Ω
Antenna, Pre-amp Power Supply
Voltage 5 V / 3.3 V / OFF
Current 50 mA max. (built-in overcurrent protection circuit)
GNSS Lock
GNSS Receiver
Receive Frequency
GPS 1575.42MHz (L1)
GLONASS 1602 MHz + k×562.5kHz (L1OF)
(k = -7,…,5,6)
GALILEO 1575.42MHz (E1-B/C)
BDS 1561.098MHz (B1)
GPS+QZSS 1575.42MHz (L1)
Status GNSS No Fix, ADJUST FREQ TO GNSS, ADJUST PHASE
TO GNSS, TRACKING, LOCK, STAY, RECOVERY
To Next Page
Loading...
